Floor Standing Air Cooler
●Reasonable structure, high heat exchange efficiency, uniform frosting, electricity-saving, and low operating cost;
●High-efficiency air cooler with large air volume, long range, low power consumption, low noise, and long service life;
●Choose stainless steel tubular electric heating tubes with strong insulation, reasonable distribution, short defrost time and good effect;
●Suitable for large blast freezing rooms and low-temperature warehouses
Floor-standing air coolers are divided into top-blowing and side-blowing types according to different air outlet directions. Floor-standing air coolers are suitable for all cold storage. They usually use thermal defrosting or water defrosting. The shell must be tight and watertight, and the water tray should not cause defrost water to splash into the cold room.
Floor-standing air coolers are simple to install, easy to operate and maintain, and have low installation and maintenance costs.
They can be divided into three categories according to their uses:
① Used in a cold storage room for cooling food (-2℃~+4℃);
② Used in frozen food cold room (-25℃~-18℃);
③Used in freezing room (-30℃~-23℃).
Coil material | Stainless steel, copper, aluminum |
Fin material | Aluminum, hydrophilic aluminum foil, epoxy resin aluminum foil |
Air outlet method | Top airflow and side airflow |
Shell material | Plastic spray or stainless steel |
Refrigeration capacity | 30~100KW |
Room temperature | 20~-40℃ |
Refrigerant | Fluorine, ammonia, carbon dioxide, ethylene glycol cooling |
Liquid supply method | Direct expansion liquid supply or barrel pump liquid supply |
The test pressure of copper and aluminum tubes is 3.0Mpa, and the maximum test pressure of stainless steel is 6.0Mpa. | |
Adopt a detachable access door equipped with an observation window | |
If you have any questions or needs about the product, please fill in the following form and we will contact you as soon as possible.
